Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Long Beach: What to Know First

We repair and rebuild Olympia Chimney liners in Long Beach, and most liner replacement jobs run $1,900 to $4,200 depending on flue height, liner diameter, and whether the crown or top plate needs work too. A straightforward stainless liner swap on an Olympia system is usually a single-day job. Full rebuilds, where brick and mortar above the roofline come down and go back up, typically run $4,500 to $9,000 in Long Beach and take two to four days. This page is for homeowners who own an Olympia Chimney product, know something is wrong, and want straight answers before anyone climbs a ladder. Call (631) 378-3317 and you’ll get a real person, not a call center.

Call (631) 378-3317

How Olympia Chimney Products Fail - and How We Fix Them

Olympia makes a full range of chimney products, but the ones we see most in Long Beach homes are their stainless steel liners, caps, and clay tile systems. Each one fails in its own way. Here’s what we actually find:

• Olympia stainless liners – seam separation at the pop rivets. On older Olympia flexible liners, the rivets that hold the seam together let go after years of salt air and heating cycles. The liner splits along its length. We see this on West End Avenue homes closer to the water. Fix: full liner replacement. Patching a split seam is a temporary gesture, not a repair.
• Olympia clay flue tiles – spalling from nor’easter freeze-thaw. Long Beach winters push moisture into clay tile, then freeze it. Tiles crack, flake, and drop pieces into the smoke shelf. Fix: a stainless Olympia liner installed inside the damaged clay, or a partial teardown if tiles are blocking the flue entirely.
• Olympia top-mounted dampers – rusted hinge pins. The cast aluminum top damper works fine until salt corrosion seizes the hinge. You get a damper that won’t close, or one that’s stuck half-open. Fix: we replace the damper assembly and check the mounting collar for rust-through while we’re up there.
• Olympia chimney crowns – cracked at the flue collar. Crowns on Long Beach chimneys crack where they meet the clay or steel flue. Water gets in, freezes, widens the crack. Fix: a proper poured crown with a drip edge, not a smear of caulk. We form and pour it on site.
• Olympia caps – mesh screens gone after a storm. Wind off the ocean tears screen mesh. Birds get in. You hear them in the flue at 5 a.m. Fix: cap replacement, usually the same visit once we confirm the liner below is still sound with a camera check.

One thing worth saying plainly: as an independent Olympia Chimney service provider, we are not authorized by the manufacturer. We work on their products every week, and we know their failure modes, but nobody at Olympia signs off on our work. That’s why the 90-Day Done Right Promise matters. It’s our name on the invoice, not theirs.

Our Olympia Chimney Chimney Liner & Rebuild Process

Every job starts the same way, whether it’s a liner replacement or a full rebuild:

1. 1
   You call (631) 378-3317. Wendell or one of the crew picks up. You tell us what you’re seeing. We give you a straight answer about whether it sounds urgent or can wait.
2. 2
   We show up and run a camera down the flue. You watch the footage with us. No camera, no verdict. If the liner is fine and the problem is elsewhere, we’ll tell you that too.
3. 3
   We price the work before anything comes off the truck. The number you hear is the number on the invoice. No add-ons after we’ve opened the wall or pulled the old liner.
4. 4
   Parts decision. If it’s an Olympia part that’s still available and still the right call, we use it. If a DuraFlex, HeatShield, or Gelco liner is the better fit for your flue dimensions and heating appliance, we’ll say so and tell you why. Warranty-safe is the rule. We never install a part that voids your appliance warranty.
5. 5
   The repair or rebuild. Liner down, liner up, crown poured, brick re-laid, whatever the job needs. We tarp, we clean, and we don’t leave a mess in your yard.
6. 6
   Final camera pass and the write-up. You see the finished flue on screen, then we hand you the paperwork with the 90-Day Done Right Promise on it. If it’s not right, one call brings us back.

What Olympia Chimney Chimney Liner & Rebuild Costs in Long Beach

Here are the ranges we actually quote in Long Beach right now:

• Olympia stainless liner replacement (single flue): $1,900 - $3,400 depending on liner diameter and roof access.
• Liner replacement plus new crown: $2,800 - $4,600.
• Partial rebuild (above the roofline): $4,500 - $7,000.
• Full rebuild (from the roof up or below the roof line): $5,500 - $9,000+ if structural repair is needed.

What moves the price: roof pitch and access on Long Beach lots, whether the old clay tile needs to be broken out, scaffold requirements on taller chimneys, and the liner diameter your appliance calls for. A wood stove takes a 6-inch liner. A furnace takes something different. We’ll talk you through it on the phone, and the estimate is free. No trip charge inside the county.

Why Long Beach Homeowners Call Top Hat Chimney for Olympia Chimney Work

Wendell Pike started this company in 1999, and he’s been in more Long Beach chimneys than he can count, from the older colonials along West End Avenue to the smaller capes near the middle school. He’s the guy who tells you straight when a liner can wait another season and when it genuinely can’t. We answer the phone around the clock, which means 2 a.m. on a cold January night you’re talking to a person, not a voicemail box. Our techs are background-checked, they wear uniforms, and they give you a real arrival window and call if it slips. We work with Olympia parts when that’s the right call, and we also carry DuraFlex, HeatShield, and Gelco products when the job calls for something specific. And every job gets the 90-Day Done Right Promise in writing. If it doesn’t need doing, we’ll tell you that too.

FAQs